View TS820_4947569.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TN805, TN815, TS820 TYN608, TYN808, TYN1008
Sensitive and standard 8 A SCRs
Features

A
On-state rms current, IT(RMS) 8 A Repetitive peak off-state voltage, VDRM/VRRM 600 to 1000 V Triggering gate current, IGT 0.2 to 15 mA
KA G
G
A
A
K
K
A
G
Description
Available either in sensitive (TS8) or standard (TN8 / TYN) gate triggering levels, the 8 A SCR series is suitable to fit all modes of control found in applications such as overvoltage crowbar protection, motor control circuits in power tools and kitchen aids, inrush current limiting circuits, capacitive discharge ignition and voltage regulation circuits. Available in through-hole or surface-mount packages, they provide an optimized performance in a limited space. Table 1. Device summary
Voltage (xxx) VDRM/VRRM Order code 600 V TN805-xxxB TN805-xxxH TN815-xxxB TN815-xxxH TS820-xxxB TS820-xxxH TS820-xxxT TYNx08RG X X X X X X X X X X X X 700 V 800 V X X X X
DPAK TN805-xxxB TN815-xxxB TS820-xxxB
A
IPAK TN805-xxxH TN815-xxxH TS820-xxxH
A
K A G
K
A G
TO-220AB (TS820-xxxT)
TO-220AB (TYNx08RG)
Sensitivity 1000 V IGT 5 mA 5 mA 15 mA 15 mA 0.2 mA 0.2 mA 0.2 mA X 15 mA
Package DPAK IPAK DPAK IPAK DPAK IPAK TO-220AB TO-220AB
January 2010
Doc ID 7476 Rev 6
1/12
www.st.com 12
Characteristics
TN805, TN815, TS820, TYN608, TYN808, TYN1008
1
Table 2.
Characteristics
Absolute ratings (limiting values)
Value
Symbol
Parameter
TN805 TN815 TS820 TYNx08
Unit
IT(RMS) IT(AV) ITSM I2t dI/dt IGM PG(AV) Tstg Tj VRGM
On-state rms current (180 conduction angle) Average on-state current (180 conduction angle) Non repetitive surge peak on-state current I2t value for fusing Critical rate of rise of on-state current IG = 2 x IGT , tr 100 ns Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range tp = 8.3 ms tp = 10 ms tp = 10 ms F = 60 Hz tp = 20 s
Tc = 110 C Tc = 110 C 73 Tj = 25 C Tj = 25 C Tj = 125 C Tj = 125 C Tj = 125 C 70 24.5
8 5 100
A A A 95 45 A2S A/s A W C V
50 4 1 - 40 to + 150 - 40 to + 125 5
Maximum peak reverse gate voltage (for TN8xx and TYNx08 only)
Table 3.
Symbol IGT VGT VGD VRG IH IL dV/dt VTM Vt0 Rd IDRM IRRM
Sensitive electrical characteristics (Tj = 25 C, unless otherwise specified)
Test conditions VD = 12 V, RL = 140 VD = VDRM, RL = 3.3 k, RGK = 220 IRG = 10 A IT = 50 mA, RGK = 1 k IG = 1 mA ,, RGK = 1 k VD = 65% VDRM, RGK = 220 ITM = 16 A, tp = 380 s Threshold voltage Dynamic resistance VDRM = VRRM, RGK = 220 Tj = 125 C Tj = 25 C Tj = 125 C Tj = 125 C Tj = 25 C Tj = 125 C Tj = 125 C MAX. MAX. MIN. MIN. MAX. MAX. MIN. MAX. MAX. MAX. MAX. 1 mA TS820 200 0.8 0.1 8 5 6 5 1.6 0.85 46 5 Unit A V V V mA mA V/s V V m A
2/12
Doc ID 7476 Rev 6
TN805, TN815, TS820, TYN608, TYN808, TYN1008 Table 4.
Symbol IGT VGT VGD IH IL dV/dt VTM Vt0 Rd IDRM IRRM VD = VDRM, RL = 3.3 k IT = 100 mA , gate open IG = 1.2 IGT VD = 67% VDRM, gate open ITM = 16 A tp = 380 s Tj =125 C Tj = 25 C Tj = 125 C Tj = 125 C Tj = 25 C Tj = 125 C Tj = 125 C
Characteristics
Standard electrical characteristics (Tj = 25 C, unless otherwise specified)
Test conditions MIN. VD = 12 V, RL = 33 MAX. MAX. MIN. MAX. MAX. MIN. MAX. MAX. MAX. MAX. 2 mA 25 30 50 TN805 0.5 5 TN815 2 15 1.3 0.2 40 50 150 1.6 0.85 46 5 30 70 150 TYNx08 2 mA 15 V V mA mA V/s V V m A Unit
Threshold voltage Dynamic resistance VDRM = VRRM
Table 5.
Symbol Rth(j-c)
Thermal resistance
Parameter Junction to case (DC) S(1) = 0.5 cm2 DPAK IPAK TO-220AB Value 1.3 70 100 60 C/W Unit C/W
Rth(j-a)
Junction to ambient (DC)
1. S = Copper surface under tab
Figure 1.
Maximum average power Figure 2. dissipation versus average on-state current
IT(AV)(A)
10.0
Average and DC on-state current versus case temperature
P(W)
8 7 6 5 4 3
360
= 180
D.C.
9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0
= 180
2 1 0 0 1 2 3 4 5 6
IT(AV)(A)
1.0 0.0 0 25 50
Tcase(C)
75 100 125
Doc ID 7476 Rev 6
3/12
Characteristics
TN805, TN815, TS820, TYN608, TYN808, TYN1008
Figure 3.
Average and DC on-state current versus ambient temperature (DPAK)
Figure 4.
Relative variation of thermal impedance junction to case versus pulse duration
IT(AV)(A)
2.0 1.8 1.6
D.C.
K=[Zth(j-c)/Rth(j-c)]
1.0
Recommended pad layout, FR4 printed circuit board
0.5
= 180
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 25 50 75 100 125
0.2
Tamb(C)
tp(s)
0.1 1E-3 1E-2 1E-1 1E+0
Figure 5.
Relative variation of thermal impedance junction to ambient versus pulse duration (DPAK)
Figure 6.
Relative variation of gate trigger current and holding current versus junction temperature for TS820
K=[Zth(j-a)/Rth(j-a)]
1.00
2.0
IGT,IH,IL[Tj] / IGT,IH,IL[Tj=25C]
1.8
IGT
Recommended pad layout, FR4 printed circuit board
1.6
DPAK
1.4 1.2
IH & IL RGK = 1k
0.10
TO-220AB / IPAK
1.0 0.8 0.6 0.4
tp(s)
0.01 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2
0.2 0.0 -40 -20 0 20
Tj(C)
40 60 80 100 120 140
Figure 7.
Relative variation of gate trigger Figure 8. and holding current versus junction temperature
6.0 5.5
IGT
Relative variation of holding current versus gate-cathode resistance (typical values)
Tj = 25C
IGT,IH,IL[Tj] / IGT,IH,IL[Tj=25C]
2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40 -20 0 20 40 60 80 100 120 140
IH & IL
IH[RGK] / IH[RGK=1k]
TN8 and TYNx8
TS8
5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5
Tj(C)
1.0 0.5 0.0 1E-2 1E-1
RGK(k)
1E+0 1E+1
4/12
Doc ID 7476 Rev 6
TN805, TN815, TS820, TYN608, TYN808, TYN1008
Characteristics
Figure 9.
Relative variation of dV/dt immunity Figure 10. Relative variation of dV/dt immunity versus gate-cathode resistance versus gate-cathode capacitance (typical values) for TS820 (typical values) for TS820
dV/dt[CGK] / dV/dt[RGK=220]
15.0
Tj = 125C VD = 0.67 x VDRM VD = 0.67 x VDRM Tj = 125C RGK = 220
dV/dt[RGK] / dV/dt[RGK=220]
10.00
12.5
1.00
10.0
7.5
0.10
5.0
2.5
RGK(k)
0.01 0 200 400 600 800 1000 1200 1400 1600 1800 2000
CGK(nF)
0.0 0 20 40 60 80 100 120 140 160 180 200 220
Figure 11. Surge peak on-state current versus Figure 12. Non-repetitive surge peak on-state number of cycles current and corresponding values of I2t
ITSM(A)
100 90 80 70 60 50 40 30 20 10 0 1 10
Repetitive TC=110C TN8 / TS8 Non repetitive Tj initial=25C TYN08 tp=10ms One cycle
ITSM(A), I t (A s)
1000
Tj initial = 25C
2
2
ITSM TYN08 dI/dt limitation
100
Sinusoidal pulse width tp < 10 ms
TN8 / TS8
TYN08 It
2
TN8 / TS8
Number of cycles
10
100 1000
tp(ms)
0.01 0.10 1.00 10.00
Figure 13. On-state characteristics (maximum Figure 14. Thermal resistance junction to values) ambient versus copper surface under tab (DPAK)
ITM(A)
50.0
Tj max.: Vt0=0.85V Rd=46m
Rth(j-a)(C/W)
100
80
Epoxy printed circuit board FR4 copper thickness = 35 m
10.0
Tj=max
60
1.0
Tj=25C
40
20
VTM(V)
0.1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
S(cm)
0 0 2 4 6 8 10 12 14 16 18 20
Doc ID 7476 Rev 6
5/12
Ordering information scheme
TN805, TN815, TS820, TYN608, TYN808, TYN1008
2
Ordering information scheme
Figure 15. TN8 series
TN 8 05 - 600 B (-TR)
Standard SCR series Current 8 = 8A Sensitivity 05 = 5mA 15 = 15mA Voltage 600 = 600V 800 = 800V Package B = DPAK H = IPAK Packing mode Blanck = Tube -TR = Tape & Reel
Figure 16. TS8 series
TS 8 20 - 600 B (-TR)
Sensitive SCR series Current 8 = 8A Sensitivity 20 = 200A Voltage 600 = 600V 700 = 700V Package B = DPAK H = IPAK T = TO-220AB Packing mode Blanck = Tube -TR = Tape & Reel
Figure 17. TYNx08 series
TYN
Standard SCR series Voltage 6 = 600V 8 = 800V 10 = 100V Current 8 = 8A Packing mode RG = Tube
6
08
RG
6/12
Doc ID 7476 Rev 6
TN805, TN815, TS820, TYN608, TYN808, TYN1008
Package information
3
Package information

Epoxy meets UL94, V0 Lead-free packages
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Table 6. DPAK dimensions
Dimensions Ref. Millimeters Min. A
E B2 C2 L2 A
Inches Min. 0.086 0.035 0.001 0.025 0.204 0.017 0.018 0.236 0.251 0.173 0.368 Max. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 0.259 0.181 0.397
Max. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 4.60 10.10
2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 6.40 4.40 9.35
A1 A2 B B2
D
H L4 B G A1
R
C C2
R C
D E
A2 0.60 MIN.
G H
V2
L2 L4 V2
0.80 typ. 0.60 0 1.00 8
0.031 typ. 0.023 0 0.039 8
Figure 18. Footprint (dimensions in mm)
6.7 3 3 1.6
2.3 6.7 2.3
1.6
Doc ID 7476 Rev 6
7/12
Package information Table 7. IPAK dimensions
TN805, TN815, TS820, TYN608, TYN808, TYN1008
Dimensions Ref. Millimeters Min. A A1 A3
A E B2 L2 C2
Inches Min. 0.086 0.035 0.027 0.025 0.204 Typ. Max. 0.094 0.043 0.051 0.035 0.212 0.037 0.035
Typ.
Max. 2.40 1.10 1.30 0.90 5.40 0.95
2.20 0.90 0.70 0.64 5.20
B B2 B3 B5
D
0.30 0.45 0.48 6 6.40 2.28 4.40 16.10 9 0.8 0.80 10 9.40 1.20 1 0.354 0.031 4.60 0.173 0.60 0.60 6.20 6.60 0.017 0.019 0.236 0.252
C C2
0.023 0.023 0.244 0.260 0.090 0.181 0.634 0.370 0.047 0.031 0.039 10
H L
L1
B3 B V1 A1
D E e
C A3
e G
B5
G H L L1 L2 V1
8/12
Doc ID 7476 Rev 6
TN805, TN815, TS820, TYN608, TYN808, TYN1008 Table 8. TO-220AB dimensions (for TS820-xxxT)
Package information
Dimensions Ref. Millimeters Min. A C
H2 Dia L5 L7 L6 L2 F2 F1 L9 L4 F G1 G M E D C A
Inches Min. 0.173 0.048 0.094 0.019 0.024 0.044 0.044 0.194 0.094 0.393 Max. 0.181 0.051 0.107 0.027 0.034 0.066 0.066 0.202 0.106 0.409
Max. 4.60 1.32 2.72 0.70 0.88 1.70 1.70 5.15 2.70 10.40
4.40 1.23 2.40 0.49 0.61 1.14 1.14 4.95 2.40 10
D E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 M Diam.
16.4 typ. 13 2.65 15.25 6.20 3.50 14 2.95 15.75 6.60 3.93
0.645 typ. 0.511 0.104 0.600 0.244 0.137 0.551 0.116 0.620 0.259 0.154
2.6 typ. 3.75 3.85
0.102 typ. 0.147 0.151
Doc ID 7476 Rev 6
9/12
Package information Table 9.
TN805, TN815, TS820, TYN608, TYN808, TYN1008 TO-220AB dimensions (for TYNx8 series)
Dimensions Ref. Millimeters Min. A a1
B OI L F A b2 C
Inches Min. Typ. Max. 0.625 0.147
Typ.
Max.
15.20 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 2.40 6.20 3.75
15.90 0.598
a2 B b1 b2 C
14.00 0.511 10.40 0.393 0.88 1.32 4.60 0.70 2.72 2.70 6.60 3.85 0.024 0.048 0.173 0.019 0.094 0.094 0.244 0.147
0.551 0.409 0.034 0.051 0.181 0.027 0.107 0.106 0.259 0.151
I4 l3 a1 l2 c2
c1 c2
a2
e
M
F
c1
b1 e
OI I4 L l2 l3 M
15.80 16.40 16.80 0.622 0.646 0.661 2.65 1.14 1.14 2.60 2.95 1.70 1.70 0.104 0.044 0.044 0.102 0.116 0.066 0.066
10/12
Doc ID 7476 Rev 6
TN805, TN815, TS820, TYN608, TYN808, TYN1008
Ordering information
4
Ordering information
Table 10. Ordering information
Marking(1) TN805x00 TN805x00 TN805x00 TN815x00 TN815x00 TN815x00 TS820x00 TS820x00 TS820x00 TS820x00T TYNx08 Package DPAK DPAK IPAK DPAK DPAK IPAK DPAK DPAK IPAK TO-220AB TO-220AB Weight 0.3 g 0.3 g 0.4 g 0.3 g 0.3 g 0.4 g 0.3 g 0.3 g 0.4 g 2.3 g 2.3 g Base qty Delivery mode 75 2500 75 75 2500 75 75 2500 75 50 50 Tube Tape and reel Tube Tube Tape and reel Tube Tube Tape and reel Tube Tube Tube
Order code(1) TN805-x00B TN805-x00B-TR TN805-x00H TN815-x00B TN815-x00B-TR TN815-x00H TS820-x00B TS820-x00B-TR TS820-x00H TS820-x00T TYNx08RG
1. x (6, 7, 8, or 10) depends on voltage
5
Revision history
Table 11.
Date Apr-2002 13-Feb-2006 22-Jan-2010
Document revision history
Revision 4A 5 6 Last update. TO-220AB delivery mode changed from bulk to tube. ECOPACK statement added. Alpha definition updated in Figure 1. Thermal resistance, junction to case, updated in Table 5. Changes
Doc ID 7476 Rev 6
11/12
TN805, TN815, TS820, TYN608, TYN808, TYN1008
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
12/12
Doc ID 7476 Rev 6

▲Up To Search▲

Price & Availability of TS820

	To Download TS820 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .